CMG Suite v2024 full crack download unlimited Computer Modelling Group 2024

CMG develops market-leading reservoir simulation software, which is recognized worldwide as the industry standard for advanced recovery processes.

 

CMG’s superior technology continues to break new ground for capabilities — simulating the simple to the most advanced recovery processes through a combination of easy-to-use model building workflows, state-of-the-art Performance Enhancement Technology and cross-disciplinary multi-physics (e.g. thermal effects, geochemistry, geomechanics, fluid and phase behavior, wellbore hydraulics and completions) required to accurately model recovery processes. Latest version of CMG is 2024.101

What’s New in GEM 2024.10:

SIMULATOR FEATURE ENHANCEMENTS

CO2 Density Interpolation in Pure CO2 Grid Blocks

During CO2 injection and storage operations, as injected CO2 displaces components especially near wells, the grid blocks gradually become richer and richer in CO2, eventually containing nearly pure CO2. However, there is no gradual phase transition from gas to liquid for a pure substance due to the limited degree of freedom, resulting in a discontinuous phase density across the saturation point and causing convergence difficulties.

A new keyword *CO2-DEN-SMOOTH is introduced to interpolate phase CO2 density between liquid and vapor states for nearly pure CO2 grid-blocks. This eliminates density discontinuity during the phase change, thereby enhancing the stability and convergence behavior of the simulation. See keyword *CO2-DEN-SMOOTH in GEM manual and template data set gmghg054.dat

Component Molar Well Stream Rates through Outboard

The component molar well rate and cumulative in different surface streams can now be passed to third party applications though Outboard by using newly added sub-keyword *WELL-QMOL of *OUTLIST. Each of the component molar rates are split into four streams: OIL, GAS, WTG and INL (depending on the separator specification). This data could also be accessed by Pycontrol for updating recurrent information during a run.

IPR Table Generation

The heuristics of IPR table generation have been improved, especially for wells completed in multiple layers and exhibiting back-flow.

Three options are provided for selecting the pressure column in the IPR table, i.e.,  allowing equi-distance pressure, existing non-linear, or the new non-linear approach for handling backflow, respectively.

Also, in addition to keyword *IPRTAB, a command line option “-iprtab n” is provided to indicate the number of rows to be created in the IPR table. These options are useful for models running GEM coupled with third party wellbore or surface network programs.

SOLVER FEATURE ENHANCEMENTS

PDEGAB Setting for the Linear Solver Pre-Conditioner

The solver pre-conditioner degree is controlled by two keywords, *PDEGAA and *PDEGAB, which by default are set to 1 and 2, respectively. The *PDEGAB 0 removes the separator class and makes the solver convergence faster at the expense of a marginal increase in solver iterations. For the *AUTOP2D option, the selection of *PDEGAB 1 results in saving in the run time in most of the models.

A new strategy based on the number of active grid-blocks automatically sets the PDEGAB to 0, 1, or 2 resulting in considerable savings in the run time in most models tested. If necessary, this can be overridden by the explicit specification of keyword *PDEGAB in the data file or through command line option “-pdegab n”.

GEM’s end-time summary echoes the value of PDEGAA and PDEGAB for easy identification of the values used during the simulation in different runs.

GEOMECHANICS FEATURE ENHANCEMENTS

Modified Cam Clay Constitutive Model

Three keywords, *MCDIFTOLP, *MCUNLOAD, and *YOUNGMAX are added for improving the modeling of Modified Cam Clay feature.

Keyword *MCDIFTOLP allows specification of a pressure tolerance to determine if the material is in a loading or unloading state.

The purpose of keyword *MCUNLOAD is to constrain the unloading state at a particular time in the recurrent data. When this keyword is present, normally in recurrent section, the Young’s modulus is computed by either the keyword *MCBMODINI or the keyword *MCBULKMOD.

Keyword *YOUNGMAX is used to specify a value to limit the unloading Young’s modulus computed by the keyword *MCBULKMOD.

See template data sets gmgmc093 and gmgmc094.

GCUPDATE Improvements

A new keyword *GCUPDTOL tol is introduced to specify a pressure tolerance to limit the magnitude of pressure change to stabilize the numerical calculations in geomechanics. This consists of a condition, tol, that is a pressure value above which *GCUPDATE is triggered irrespective of the update frequency specified or defined via the default.

CHANGES AND BUG FIXES

• Fixed failure in trigger action activation with outboard

• Fixed GCUPDATE for non-isothermal geomechanics models

• Fixed output of *NBSTRAINI and *NBSTRAINJ in models with geomechanics

What’s New in Builder 2024.10:

Improvements and Fixes

Performance updates

The first Builder update of the year brings with it speed improvements to workflows involving planar hydraulic fractures. We have rearchitected the Hydraulic Fracture dialog to remove existing calculation delays, allowing responsive window interactions. Visualization for refinements and fractures has also been updated to reflect model adjustments accurately and promptly.

Stability In this release we addressed reliability when working with include (*.inc) and FAB (*.fab) files with different paths and file names after saving. An ongoing initiative to address potential stability issues continues by proactively improving code quality and introducing more robust safeguards within the product. These strategic improvements collectively contribute to a more seamless and reliable user experience, reinforcing the software’s stability and user-friendliness.